AVlogic Displayport to VGA converter Displayport RGB어댑터

디스플레이포트 신호를 VGA (RGB)로 변환해주는 어댑터입니다. 반대로는 작동하지 않습니다.

성능개선을 위해서 공급시기에 따라서 색상 및 외관디자인은 변경될 수 있으며 기술문의 및 사후지원은 AVLOGIC.CO.KR 을 참조바랍니다.

DisplayPort to VGA (HD-15) Active Adapter

Connect the DisplayPort (male) end of the connector to your computer and plug your existing VGA cable from the monitor into the VGA (female) adapter. Setup is complete, no software required. The active circuitry built into the DisplayPort to VGA cable adapter seamlessly converts the DisplayPort’s video signal into a crystal clear VGA video signal. The latching DisplayPort connector keeps the adapter securely in-place.

This Active DisplayPort to VGA adapter requires no external power. It is designed to use the power provided through the DisplayPort connection. The power-saving standby mode is initiated through the DisplayPort source or based on the monitor’s status, which is automatically detected by the adapter. Standby mode reduces power consumption when the adapter is not in use and is ideal for energy conservation.

Please note, this Active adapter supports 3 monitor display configurations powered by AMD Eyefinity Multi-Display technology.

The DisplayPort to VGA Converter converts your digital displayport signal to analog VGA signal. Just plug in the displayport source and display, you can enjoy the beautiful image. Simple connection is here!

It offers solutions for digital entertainment center, projector factory, noisy space and security concerns, conference room presentation, school and corporate training environments.

FEATURES

This DisplayPort to VGA converter has many features that enable it to perform in a superior manner. Among those features you will find:

1. Display resolution up to:

1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz

1920x1080P, 60Hz, 10bpc: 144MHz

2. DisplayPort ver1.1: DP two lanes or DP one lane

3. RGB analog video（VGA port） output:Configured for 700mV voltage swing

4. Automatic sink detection and stand by mode

5. Spread spectrum (de-spreading) for EMI reduction

6. EDID Pre-fetch (VGA EDID Conversion)

7. Sink detection based on DDC return

8. Measured power: Active 1.4W, Standby 100mW

9. Power supply: +3.3V (Form DP)

SPECIFICATIONS